Thursday, September 24, 2009
Thursday, September 17, 2009
Selamat Hari Raya

Friday, July 31, 2009
T.T
Sunday, July 12, 2009
=D
13 weeks to go..
This semester subject :
Applied Numerical Method (no final exam)
Teknorat
Ship Resistance and Propulsion
Lab 3
English Advance
Naval Architecture 2
Instrumentation
Next week gonna be quite busy due to..
************************************************************************************
Deepwater Floating Structure Model Competition 2009
:: WELCOME ::
The Deepwater Floating Structure Model Competition has been organized by the Faculty of Civil Engineering in faculty level. Owing to the interest and support shown by the previous participants, Faculty of Civil Engineering is encouraged to organize this competition in a bigger scale with the participation open to all undergraduate students of Universiti Teknologi Malaysia and invited universities under the Shell Campus Ambassador program. This competition is aimed to provide a platform for university students to gain exposure in the field of offshore engineering especially in the design of deepwater floating structures. This program is supported by the Faculty of Mechanical and Kolej Tun Hussein Onn and sponsored by Shell.
SUBMISSION
Entry form and proposal must be summited to Organizer at Postgraduate Office (M47-FKA) or email to norhazilan@utm.my before 15 July 2009
:: IMPORTANT DATES ::
16/7/2009 - Announcement for qualified team
17/7/2009 - Introduction to floating structure stability
25 July 2009 - Competition Day
Judging Criteria
:: JUDGING CRITERIA ::
- The team with the highest Efficiency Factor will receive 55 points. The other teams will be given points on a decreasing scale based on the ratio of their Efficiency Factors relative to the winning team’s Efficiency factor.
- The structure supporting the greatest weight will be given 30 points, and the rest of the teams will be awarded points on a decreasing scale based on the ratio of weights they hold to the winning team’s weight.
- The promotional presentation will be worth 15 points, with the judges’ decision to be based on the features such as presentation skills, knowledge of physical science, audience appeal and others.
- Plain straw
- Masking tape
- Strand/ string
- Mineral water bottle (500ml)
- One knife and scissor
- A3 paper
- Foam cup
Specifications:
- Overall structures sizes
- Height: 600mm (maximum)
- Base (top): 180mm x 180mm
- Base (bottom): 350mm x 350mm
Basic Materials:
Each team will be provided with basic materials worth of RM 15million to construct the floating structure as follows:
- 6 bottles of mineral water (RM 6 mil)
- 1 meter of strand (RM 1 mil)
- 1 nos of masking tape (RM 2 mil)
- 1 sheet of A3 paper (RM 1 mil)
- 10 nos of plain straw (RM 1 mil)
- 4 nos of foam cup (RM 4 mil)
Limitations:
- Straws cannot be treated in any way to change their strength or appearance
- Each team will initially be provided with basic materials worth RM 15mil to construct the structure
- Extra materials can be purchased from the organizer. However the price will increase from time to time at the discretion of the organizer
- The supplied plastic bottles contain drinkable mineral water. If contestants decide to empty the bottles, the water must not be thrown away. Instead, the members of the team must drink the water to avoid any waste or they can use any container from materials provided by the organizer. Failure to comply; a point deduction will be sternly implemented or team can be disqualified from the competition.
- Prior to the testing of the structure in the basin, each team must promote their structure by giving a sales presentation using a PowerPoint presentation to the public (5 minutes time limit strictly enforced).
- Contestants are not allowed to bring any prototype or model built prior to the competition into the competition hall.
- The structure must float freely without any mooring system.
- During the test, the loading process will be carried out until the structure reaches the allowable maximum draught of 20 cm.
Participant shall be disqualified from the competition if:
- The dimension of the structure is greater than the maximum specified dimension:
- Height: 600mm (maximum)
- Base (top): 180mm x 180mm
- Base (bottom): 350mm x 350mm
- The construction of the structure takes more than 5 hours
- The presentation is more than 5 minutes
- Any materials others than those specified are used
- Load container will not rest on top
Goal:
- The team should aim to design a structure with the maximum load bearing capability, stable with minimum cost.
- This is quantified by the Efficiency Factors:
************************************************************************************
For more information please check out at http://resa-utm.blogspot.com/
I still not that good in controlling myself..
Still doing some stupid and nonsense stuff..
Think will take sometime...
If you did come across this blog...
Hope you will just chill over there..
Just ignore those sms
Thanks~! LOLX
NEED TO BE MORE CONFIDENT IN MYSELF~!
KaiLin~! Work hard in hospital~!
Congrats~! To EDDY
Saturday, July 11, 2009
=D
But..


Do take care of your pharmacy junior even from different uni??
Saturday, July 4, 2009
End of Summer = Start of Autumn
.jpg)



